I have Linux installed on my laptop, and the laptop does not have serial port that's why I am using a usb2serial in order to console any external devices. So here is the configuration I done on my Ubuntu linux 5.04 in order to console NetScreen firewall (this can be used with many other devices as well).
First of all I installed minicom then configured it as follows:
Ctrl+A then press Z then O, then choose "Serial port setup", then press A and configure " Serial Device : /dev/ttyUSB0" then press enter and press E and configure "Bps/Par/Bits: 9600 8N1" then press enter and save setup as default and exit and here we go.
Tags: Computers, Linux, Ubuntu, Gr33n Data
No comments:
Post a Comment